イ：ネジ部を通過される装置には、治具などを使用しネジ部には直接当てない

イ：ネジ部を通過される装置には、治具などを使用しネジ部には直接当てない。
ロ：圧力が比較的高い場合、バックアップリングを使用する。
ハ：低圧時には、初期つぶし代は重要な要素となる。
二：固定使用の場合、適度つぶし代があれば、表面粗さは規定しない。

ผลลัพธ์ (อังกฤษ) 1:

Lee: and used fixtures, such as devices that pass the screw, the screw directly without.(B): If the pressure is relatively high, using backup ring.C: low pressure during the initial kill Bill would be an important element.-2: fixed if a reasonable busting Bill if the surface roughness is not prescribed.

ผลลัพธ์ (อังกฤษ) 2:

I: The device to be passed through the threaded portion, and does not rely directly on the threaded portion uses a jig or the like.
Russia: If a relatively high pressure, I use the backup ring.
Ha: At the time of low pressure, initial squeeze is an important element.
Two: the case of a fixed use, if there is a moderate squeeze, surface roughness is not specified.

ผลลัพธ์ (อังกฤษ) 3:

In the device through a screw thread, not directly use the tool. B: at a relatively high pressure when the backup ring. C: at the time, is an important factor in the initial stage of the crusher. In the case of using a fixed at two: the killing was moderate, the surface roughness is not specified. At