もし、このランプはＣＬＡＳＳ ＣのＨＬ２個を左右の取付間隔２００ｍｍ以

もし、このランプはＣＬＡＳＳ ＣのＨＬ２個を左右の取付間隔２００ｍｍ以内で装着します。

それから得意先はＨＬ２個に取り付けを使用するが出来る事を確認するならば、
それモデルの名前をチェンジする使用して、
Device No.とApproval No.はまだもともとの１個ランプに使用する事が出来るでしょうか。？

下記通りに絵を参考ください。

ผลลัพธ์ (อังกฤษ) 1:

If this lamp is seated in the left and right mounting distance 200 mm less than CLASS C HL 2.If then, can the customer use replacing the HL 2To change the name of the model using theNo device... and Approval No... you will able to use lamp also is still under 1.In the following, see picture.

ผลลัพธ์ (อังกฤษ) 2:

If this lamp is fitted with HL2 pieces of CLASS C within the left and right of the mounting spacing 200mm. If then the customer to make sure that you can, but to use the attachment to HL2 one, use to change the name of it model, able to use the Device No. and Approval No. is still the original one lamp What can. ? Please refer to the picture below street.

ผลลัพธ์ (อังกฤษ) 3:

If the lamp CLASS C HL two is mounted within the mounting distance of 200 mm.
If you are good at the destination and then make sure that can be used in the HL 2
Use it to change the name of the model
Device No and Approval No you can still use the original one lamp to??
Please refer to the picture below in the street.