材料をほとんど削らず表面だけを仕上げます。 【特長】●材料をほとんど削

材料をほとんど削らず表面だけを仕上げます。
【特長】
●材料をほとんど削らず表面だけを仕上げます。
●丸みのある研磨面が得られ、サンドペーパーのように深いスリ傷が入りません。
●オープン構造のため、ほとんど目づまりがありません。
●柔軟性があるため、曲面部分の仕上げにも最適です。
●日本製の研磨材、軸を使用しています。

【用途】
●酸化皮膜やサビ取り、汚れ落とし。●塗装コートや、ラミネート前の粗面化。●ステンレスのヘアライン仕上げ。

【仕様】
●粒度(#):320
●外径(mm):40
●軸長(mm):40
●軸径(mm):6
●幅(mm):25
●不織布枚数(枚):24
●質量(g):31
●最高使用回転数:3000rpm

【ご注意】
●最高使用回転数以下でご使用ください。
●保護メガネをご使用ください。

【原産国】
●中国

※画像は、代表例画像となっておりますので仕様をご確認お願いします。
この商品を見た人はこんな商品も

ผลลัพธ์ (อังกฤษ) 1:

Most material being whitened without drilling, done only on the surface. [Features]-Most material being whitened without drilling, done only on the surface.-Polished surface is rounded and not as deep as the sandpaper scratches on.-Open structure for the little loading.-For flexibility on the part surface finish is ideal.-Use abrasive material made in Japan, axis.[Applications]-Oxidation, rust and dirt. -Roughness of paint coat or laminate before. -Brushed stainless steel.[Specification]-Particle size (#): 320-Outer diameter (mm): 40-Shaft length (mm): 40-Shaft diameter (mm): 6-Width (mm): 25-Non-woven cloth sheets (sheets): 24-Weight (g): 31-Maximum operating speed: 3000 rpmPlease note:-Use at speeds below maximum use rpm.-Use protective eyewear.Country of origin:-China* Image is a typical example image specifications check please.People who looked at this product also checked

ผลลัพธ์ (อังกฤษ) 2:

Finish the only almost cut without surface material.
[Features]
● will finish only mostly shaved without the surface of the material.
● obtained polished surface with a rounded, it does not enter the deep scratches as sandpaper.
● Because of the open structure, there is little clogging.
● because there is flexibility, making it ideal for finishing the curved surface portion.
● Made in Japan of the abrasive, it uses the axis. [Applications] ● oxide film and rust up, removed dirt. ● paint coat or laminate before roughening. ● hairline finish of the stainless steel. [Specifications] ● grain size (#): 320 ● outer diameter (mm): 40 ● axial length (mm): 40 ● Shaft Diameter (mm): 6 ● Width (mm): 25 ● non-woven fabric sheets (sheets): 24 ● mass (g): 31 ● maximum use rotational speed: 3000rpm [attention] Please use ● The highest use rotation speed or less. ● Please use protective glasses. [Country of origin] ● China ※ The image, please confirm the specifications because it is a representative example image. People who looked at this product such items also

ผลลัพธ์ (อังกฤษ) 3:

The material is almost no perfect only on the surface.
"Features.
"Little to no perfect only on the surface.
The polishing surface is obtained by rounding the sand paper is no deep scratches.
For the open structure, there is little eyes.
Because of the flexibility by perfect surface finish.
Made in Japan by the abrasive is used.
The application.
By oxide coating, rust and dirt. By laminating and coating, the coating of surface roughening. * stainless steel brushed finish.
The specification.
(#): 320 * Size
The outer diameter of 40 mm * I
By using the axial length of 40 mm
By the shaft diameter (mm) Ltd. (6)
The width of 25 mm * I
By the number of sheets 24 nonwoven Ltd.
By using the mass (g) 31
By using the rotation number up to 3000 rpm
(note)
By using the maximum speed is less than or equal to use.
Please use by protective.
The country of origin.
* China
The image, please confirm the specification and it is a typical example of the image.
I saw this products