申さん返信ありがとうございます。１．バルクリの件NPTでの工程でバルブ

申さん

返信ありがとうございます。

１．バルクリの件

NPTでの工程でバルブ調整が発生している件、わかりました。

HOTのデータは、そうであれば参考の取り扱いになる事も理解します。

現在、AKでは、ベアでのバルクリは、特に調整していません。その結果が、先に添付した

HOTの１年間のデータになります。冷間は、温度補正をかみしたまとめを実施中です。

まとりましたら、NPTにも共有させていただきます。

そうした場合、NPTでのバルクリの調整率が気になります。

NPTでの交換した記録でも実態がわかると思います。工程での交換した履歴など部位に特異性が

あるとか何かありますか？現在、NMIでは、EXH ＃１－２が広め傾向の指摘あります。



２．オイル消費の件

本件、AKのデータとかも提示します。

今回、お願いした理由は、AK 開発より、昨今拠点立ち上がりや機種の追加などで、オイル消費の

問題が、浮上してくる、本件、開発としてもこの様な変化要素に対するバラツキを抑える必要が

あるのではとの話で、まずは、バラツキ実態を知りたいとのお願いがあり、メールした次第です。

別途お送りします。

ผลลัพธ์ (อังกฤษ) 1:

Shin

thank you for your reply.

1. From バルクリ

OK results in the NPT process encounters a valve adjustment.

Also would become a reference handling HOT data, otherwise if you understand.

Now, AK, バルクリ in the bear is especially doesn't adjust. Previously attached to the results

HOT year data will be. Cold is the conclusion you bite the temperature correction in.

Our will, will share in the NPT.

If you do, the rate of adjustment of バルクリ in the NPT care.

I know the actual record was replaced in the NPT. In history was exchanged in the process, such as singularity is

or what do you have? Currently, NMI, EXH ＃1－2 pointed out that the larger trend.



２． Oil consumption from

presents data in this case, AK too.

Because this time, it asked the AK development than in adding base rise or machine recently, oil consumption

problem emerges, this matter,Must reduce the deviation for elements like this change as development

and so with story, first the variation in actual want to know ask, by email as soon as it is.

Separate sreenath.

ผลลัพธ์ (อังกฤษ) 2:

Monkey Reply Thank you. 1. Ken Barukuri matter that occurred in the valve adjustment process in the NPT, I've found. The data of HOT, that will be the handling of reference and if so will also understand. Currently, AK, Barukuri at Bear does not have specially tuned. The result is the attached earlier is the data of one year of HOT. Cold is the implementation of a summary that takes into account the temperature correction. i = 2> 1. Ken Barukuri matter that occurred in the valve adjustment process in the NPT, I've found. The data of HOT, that will be the handling of reference and if so will also understand. Currently, AK, Barukuri at Bear does not have specially tuned. The result is the attached earlier is the data of one year of HOT. Cold is the implementation of a summary that takes into account the temperature correction. i = 2> 1. Ken Barukuri matter that occurred in the valve adjustment process in the NPT, I've found. The data of HOT, that will be the handling of reference and if so will also understand. Currently, AK, Barukuri at Bear does not have specially tuned. The result is the attached earlier is the data of one year of HOT. Cold is the implementation of a summary that takes into account the temperature correction. The data of i = 4> HOT, that will be the handling of reference and if so will also understand. Currently, AK, Barukuri at Bear does not have specially tuned. The result is the attached earlier is the data of one year of HOT. Cold is the implementation of a summary that takes into account the temperature correction. The data of i = 4> HOT, that will be the handling of reference and if so will also understand. Currently, AK, Barukuri at Bear does not have specially tuned. The result is the attached earlier is the data of one year of HOT. Cold is the implementation of a summary that takes into account the temperature correction. It is the data of the year i = 6> HOT. Cold is the implementation of a summary that takes into account the temperature correction. It is the data of the year i = 6> HOT. Cold is the implementation of a summary that takes into account the temperature correction.













Once Mashi Matricaria, we will also be shared by NPT. In such cases, the rate of adjustment of Barukuri in the NPT is worrisome. I think reality is can be seen in the record that was replaced in the NPT. Specificity to the site, such as history was changed in the process Is there something such as a? Currently, there are indications of trends in NMI, EXH # 1-2 is spread. 2. Matter of oil consumption I will present this matter, also of data such as AK.













The reason for this time, we asked, from AK development, in such as adding a model bases and rising recently, the oil consumption problem, emerge, is necessary to suppress the variation with respect to the change elements such this matter, as well as the development of certain In talking with in, there is ask first, and of want to know the variation reality, it's up to you to mail. I will send separately.

ผลลัพธ์ (อังกฤษ) 3:

Thank you, Mr. Shen, reply, too Well, well, in NPT Bulkley is generated in the process of adjusting valve is found The HOT of data, so it is helpful in understanding As AK, bear Bulkley, not particularly As a result, which is attached to the data of HOT for 1 year Cold, while in embodiment is arranged by a temperature correction If I had too, to share in the NPT TooIn this case, in the care of NPT Bulkley adjustment rate In the recording of the exchange in NPT I think I can find Do you have something specific, such as the history to be exchanged at the site of the process? At present, the NMI, pointed out the tendency of spread EXH 1 2 Too, too, too, the oil consumption of the AK data and presentation This time, the reasons for the rise and development of modern AK based models such as add, oil consumption problem, too, the presentFirst of all, talk with necessary to suppress variations in the development and changes in elements such as it is, I want to know the actual situation and the variation is up to them Are special too Too