■まとめ①SLIDE構造のリブ設定は、0.5mm干渉設定とする。②SL

■まとめ
①SLIDE構造のリブ設定は、0.5mm干渉設定とする。
②SLIDE 部のSLOTの寸法設定は、８mm。 ボス首下7.5mm×15mm設定。
③BOX部上面側に、回転規制の溝を設定する。
④SLIDE 部の材料組合せを変更する。

⇒3Dﾌﾟﾛｯﾀ品にて作成し、改良レベルを確認しつつ、
④の項目についての検証のためｽﾗｲﾄﾞ部のみ同一材の注型試作品を作り、型Goまでに
摺動のレベルや組付け性の確認を図りたい。

ผลลัพธ์ (อังกฤษ) 1:

♦ Summary(1) to interference set up and setting up a live SLIDE structure is 0.5 mm.(2) SLOT of the SLIDE size setting is 8 mm. Boss head under 7.5 mm x 15 mm setting.(3) sets the rotation regulation grooves in the BOX of the top side.(4) to change the SLIDE of material combinations.⇒ create in 3D plotter products, confirming the improvement level (4) the verification topics for making slides, only casting prototype of the same material, to-Go Verify the level of sliding or pair of seeking.

ผลลัพธ์ (อังกฤษ) 2:

■ Summary
rib configuration of ①SLIDE structure, and 0.5mm interference setting.
SLOT dimensioning of ②SLIDE portion, 8mm. Under boss neck 7.5mm × 15mm setting.
To ③BOX upper surface side, to set the groove of the rotation regulation.
To change the material combination of ④SLIDE part.

Created in ⇒3D plotter goods, while confirming the improvement level,
make a cast prototype of the same material only slide portion for verification of the items of ④, until the type Go
of the sliding level and assembling of the I want to work to make sure.

ผลลัพธ์ (อังกฤษ) 3:

"TogetherSet of SLIDE rib structure, and set 0.5 interference.Department of SLIDE SLOT set of 8 mm. The boss fired under 7.5 mm.times.15 mm.On the upper surface of the BOX 3 sets of limiting grooves.Change of SLIDE material combination.Created by three D ﾌﾟﾛｯﾀ, recognizing that the improved levelTo make the prototype of items of the same material ｽﾗｲﾄﾞ for only part of the type GoAnd the level of the sliding assembly to be confirmed.