◆◆◆◆◆【動作確認内容】◆◆◆◆◆◆電源入り、ターンテーブル回転しま

◆◆◆◆◆【動作確認内容】◆◆◆◆◆◆
電源入り、ターンテーブル回転しました。
アンプにつなげ音だし確認済みです。
33.45のスピード変化、ピッチ変化も確認しましたが、
詳しくないため正確にあっているかは不明です。
ダストカバーは本体につながっておりません。
被せているだけです。
ダストカバー1cmほどのワレ、キズあります。
ターンテーブル(回転する部分)の上のカバーにホコリヨゴレあります。
◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆

付属品はありません。
電源コード、オーディオコードは本体に直付です。

部品取り、修理に！！

商品の詳細はこちらから↓
http://audio-heritage.jp/TECHNICS/player/sl-1200mk5.html

Technics SL-1200MK5 オープン価格（50、000前後、2002年11月1日発売）

電源 AC100V、50Hz/60Hz
消費電力 11.0W
外形寸法 幅453×高さ162×奥行353mm
重量 11.7kg


1200シリーズのアナログプレイヤー。

駆動部には独自構造のDD（ダイレクトドライブ）方式を採用しており、モーター回転部はターンテーブルと一体化し、固定部はキャビネットと一体化しています。回転数検出には全周積分型FGを使用しており、正確な回転数を全周で検出することで、高い回転精度を獲得しています。さらに、起動トルクもハイパワーを達成しており、ターンテーブルが0.7秒で定速回転に達します。
また、停止機構には純電子式ブレーキを採用しており、素早くブレーキがかかり、停止と同時に解除される構造となっています。

回転数の制御にはクォーツシンセサイザー方式を採用しており、DDモーターや全周検出FGとあいまって、正確な回転を実現しています。また、ピッチの微調整にもクォーツロックをかけることで、正確な回転精度を保ったまま連続可変のピッチ調整が可能です。
また、ピッチコントロールのスライダーのセンタークリックを無くしたことで、スムーズな操作を可能にしています。

トーンアーム架台部は精密アルミダイカストで構成されており、外部振動などの影響を低減しています。また、軸受構造には高精度ピボットと4個の軸受けを組み合わせたジンバルサスペンション方式を採用しており、回転の中心を垂直回転軸と水平回転軸が交差する1点に明確化することで、水平・垂直ともに7mgの初動感度を実現しています。
さらに、ロック付きアーム高さ調整機構を搭載しており、垂直トラッキングエラーを極小に抑えています。



この商品のランクは、 【 J 】 です。

この商品は、「ジャンク扱い」となります。
保障の対象外となりますので、宜しくご了承下さい。
記載内容を良くご確認の上、修理メンテナンスが必要な可能性があることを、
良くご理解の上で、入札をお願いいたします。


★特に説明が無い場合、お写真のもの以外の付属品はございません。
★複数落札頂きました商品は、できるだけ同梱させて頂きます。
★落札価格+消費税をお預かりいたしますのでご了承ください

ผลลัพธ์ (อังกฤษ) 1:

◆ ◆ ◆ ◆ ◆ [operation check contents] ◆ ◆ ◆ ◆ ◆ ◆
into power, I have turntable rotation.
's Sound connected to the amplifier to the confirmed.
It was confirmed speed change of 33.45, also pitch change, but it is unknown whether there is exactly for you are not familiar
.
Dust cover is not connected to the body.
I'm just covered.
Cracking of dust cover about 1cm, scratch.
There Hokoriyogore to cover the top of the (rotating parts) turntable.
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆

There is no accessory.
Power cord, audio cord is directly attached to the main body.

Part removing, to repair! !

Price ↓
http://audio-heritage.jp/technics/player/sl-1200mk5.html

technics sl-1200mk5 open here ( 50,000 before and after, details of the product are November 1, 2002 162 × depth 353mm
weight 11.7kg height release)

power ac100v, 50hz/60hz
power consumption 11.0w
Dimensions Width 453 ×


Analog player of 1200 series.

It uses dd own structure (direct drive) system to the driving unit, motor rotating part integrated with the turntable, the fixed portion is integral with the cabinet. It uses the entire circumference integral fg is the rotational speed detected, by detecting all around the exact rotational speed, and has won a high rotational accuracy. In addition, the starting torque is also achieved a high power, turntable reaches a constant speed of 0.7 seconds.
In addition,It uses a pure electronic brake to stop mechanism, brakes quickly, and it has a structure that is released at the same time as the stop.

It uses a quartz synthesizer system to control the rotational speed, coupled with the entire circumference detection fg and dd motor, and has realized the exact rotation. In addition, by applying the quartz lock also fine-tune the pitch, pitch adjustment of the continuous variable is possible while maintaining the exact rotation accuracy.
In addition,By I lost my center click of the slider pitch control, and enables smooth operation.

Tone arm mount portion is made of a precision aluminum die-casting, thus reducing the influence of external vibration. Further, it employs a gimbal suspension system that combines the bearings and four precision pivot on the bearing structure, by clarifying the point of horizontal rotation axis and the vertical axis of rotation intersects the center of rotation,I realize the initial sensitivity of 7mg both horizontal and vertical.
In addition, it is equipped with a height adjustment mechanism with locking arm, and is suppressing the minimum vertical tracking error.



Rank for this item is the [j].

This product becomes the "junk treatment".
It will be covered by the guarantee, please understand you.
On an understanding, please tender
well, that on the check, there is a possibility that requires repair maintenance better description.


★ If there is no special explanation, accessories other than those of the photograph is not.
★ The product which had more than one bid, we will ship as much as possible.
★ Please note that we keep the successful bid price consumption tax

ผลลัพธ์ (อังกฤษ) 2:

◆ ◆ ◆ ◆ ◆ behavior verification outline ◆ ◆ ◆ ◆ ◆ ◆
power the turntable spinning was.
Sound's connected amplifier is confirmed.
Confirmed 33.45 speed changes, changes in pitch, but
is unknown or unfamiliar for being accurate.
Not led to body dust cover.
Only covers with.
Dust cover about 1 cm of cracking, scratches.
ホコリヨゴレ must cover on the turn table (rotating part).
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆

No accessories.
Power code and audio code to the body immediately as it is.

Taking parts and repairs!

Product details from here ↓
http://audio-heritage.jp/TECHNICS/player/sl-1200mk5.html

50, 000, 11/2002 1, release the Technics SL-1200MK5 open price

power supply 100V, 50 Hz/60 Hz
11.0 W power consumption
external dimensions width 453 x height 162 x 353 mm
11.7 kg


Analog of the 1200 Series Player.

And adopted to drive their own structures DD (direct drive), and integrated motor rotation of the turntable, has integrated cabinets and is fixed. Accurate rotational speed detection in all around, and use the all round integral type FG to detect the rotation number, has won high rotation precision. Further, has achieved high power starting torque, turntable reaches a constant-speed rotation in 0.7 seconds.
Also,Is structure adopted NET electronic brakes stop brakes down quickly released stop and at the same time.

And adopted to the speed control of クォーツシンセサイザー, coupled with direct drive motor and all round detection FG, delivers accurate rotation. Also, while kept the exact rotation precision quartz lock on to the fine tuning of the pitch continuously variable pitch adjustment is possible.
Also,By lost pitch control slider Center click, allows for smooth operation.

Is configured in die-cast aluminium precision tonearm mounting Department, has reduced the influence of external vibration. The bearing structure at 1 points ジンバルサス suspension system combined with high precision pivot and bearing four adopted, intersects the vertical axis and horizontal axis rotation Center to make sure that.Horizontal and vertical together achieve initial sensitivity of 7 mg.
Vertical tracking error with very small, equipped with locking arm height adjustment mechanism.



This product ranks is a [J].

This item will be considered junk.
Eligible security, thank you please.
That provided better confirmation on the repair maintenance is required,
better understanding on bidding please.


★ No accessories other than in your photos, unless otherwise described.
★ multiple bid submitted products will let ships as much as possible.
★ luggage bid price tax Please note that

ผลลัพธ์ (อังกฤษ) 3:

◆◆◆◆◆【 operation check contents 】I was with a ◆◆◆◆◆◆
power supply, and a turntable turned.
Tie it to the amplifier, and it is a sound and is finished with confirmation.
I confirmed 33.45 speed changes, pace change, but am unidentified whether I am correct because
doesn't have a lot.
The dust cover doesn't lead to the main body.
I cover.
There are me approximately dust cover 1cm, a wound.
There is a dust dirt to a cover on the turntable (a turning part).
There aren't the ◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆

accessories.
Power supply cord, the audio system cord in the main body direct; is belonging to it.

For part collecting, repair!!

The details of the article are ↓
http://audio-heritage. from this placejp/TECHNICS/player/sl-1200mk5.html

TechnicsSL-1200MK5 opening price (50, around 000, November 1, 2002 release)

power supply AC100V, 50Hz/60Hz
consumption electricity11.0W
external form dimensions 453* in width 162* in height depth 353mm
weight11.7kg


An analog record player of 1200 series.

I adopt a DD (a direct drive) method of the original structure in the drive department, and the motor reel is unified with a turntable, and the fixed department is unified with a cabinet. I use all laps integral calculus type FG for the number of revolutions detection and acquire high turn precision by detecting accurate number of revolutions by all laps. Furthermore, the start torque achieves high power, too; a turntable0. Reach 定速回転 in seven seconds.
Again,I adopt purely electronic brakes in stop mechanism, and brakes work quickly, and it is with structure canceled with a stop.

I adopt a quartz synthesizer method for the control of the number of revolutions, and a DD motor and all laps detection FG and an interval realize a correct turn. In addition, pace adjustment variable consecutively is possible with having kept correct turn precision by submitting quartz rock to a fine adjustment of the pace.
Again,I enable smooth operation by having got rid of the center click of the slider of the pace control.

The tone arm footstool part consists of an exact aluminum die-casting and reduces outside influence to vibrate. In addition, adopt the gimbal suspension method that combined four bearings with highly precise pivoting for bearing structure; the center of the turn vertically in an axis and the thing that an axis clarifies to one point to intersect horizontally,Horizontal verticality realizes first action sensitivity of 7mg together.
Furthermore, it is equipped with arm height adjustment mechanism with the lock and I am very small and suppress the perpendicular tracking error.



The rank of this article [J] です.

This article becomes [junk handling].
Because the security becomes not intended, I am all right, and approve it.
I ask for a bid on
understanding that I have need repair maintenance possibilities in confirming mention contents well well.


When there isn't explanation in particular, the accessories except the thing of the photograph don't have ★.
The plural ★ article that I had you make a bid for it will bundle it as much as possible.
Because I keep a ★ successful bid price consumption tax, approve it