I make sure that the dc wiring, are wired without biting.
I measure the resistance of the housing between dc24v, 8v, 5v, and gnd lines.
And shall also be limited to the area without coating measurement point of the casing side (such as threaded portion).
Measurement point example)
operation door wiring, vts b / v connector or vts c / m (zlp8 Pinshiro)
1 pin: 24v, 2 pin: 8v,
8 pin: gnd
transport mechanism encoder wiring, encoder connector (hxp3 Pinshiro)
1 Pin: 5v
การแปล กรุณารอสักครู่..