JaSO-C607によると測定回転数が 『タイヤの回転速度 測定中のタ

JaSO-C607によると測定回転数
が 『タイヤの回転速度 測定中のタイヤの回転速度は
通常、 60ｒ/minとする。』とあるようです。MMTｈからは60RPMでないといけないのではないか？との、ご質問ない内容

JASOでは、通常60RPMと規定していますか？国際規格（ISO)では、10～250RPMと規定があります。
但し、120RPMとした場合、遠心力分等が入ってきますが、60RPMと120RPMのクロスチェックを行った場合、その景響は無視できる範囲です。
尚、次ページ以降に、JIS D4233 自動車用タイヤのユニフォーミティ試験方法の資料を参考と添付いたしましたので、ご覧ください。

ผลลัพธ์ (อังกฤษ) 1:

JaSO-C607 the according measuring rotational speed"The rotational speed of the tyre rotation speed measurement in tiresTypically, the 60r/min. "It seems certain. Not from MMTh 60 RPM with don't? And, no question contentJASO, are usually prescribed and 60 RPM? In the international standard （ ISO), 10-250 RPM and the provisions.However, 120 RPM, enters the centrifugal force, etc., but when you cross-check of 60 RPM and 120 RPM, Jing Hibiki is negligible.So, attached and reference material of JIS D4233 for automobile tire uniformity test method in the following pages, please see.

ผลลัพธ์ (อังกฤษ) 2:

JaSO-C607 to be due to the measurement speed
is the rotational speed of the "tire rotation speed during the measurement of the tire is
usually a 60r / min. "It is the phrase so. Do not Do I have a 60RPM from MMTh? And of, the question is no content in JASO, do you have defined as normal 60RPM? The international standard (ISO), there is defined as 10 ~ 250RPM. However, if you have a 120RPM, but centrifugal force worth, etc. will come in, if you have made ​​a cross-check of 60RPM and 120RPM, is the range that Keihibiki is negligible. It should be noted that, in the following pages, because the JIS D4233 material of uniformity test method of automobile tires we have attached a reference, please visit.

ผลลัพธ์ (อังกฤษ) 3:

JaSO C 607. According to the rotational speed of the tire rotating speed measurement in the rotational speed of the tire (normally, and R / min). It seems certain. You have no MMTh from 60 RPM? The question is not too JASO content is usually defined as RPM 60? ISO (international standard, and there are 10 to 250 RPM. However, in the case of RPM 120, and the centrifugal force, such as the case of RPM 60 and 120 RPM, sound landscape is negligible.At the subsequent to the next page, please find attached the uniformity testing method for automobile tire and JIS D at the reference, you can see. At